The Nineteenth Hole

Is there any difference between the Odyssey White Hot XG 2-Ball and the 2-Ball Blade?

I mean a difference in feel and performance, not looks.

And what about the White Steel? Is this considered better or worse than the White Hot putters?

Also, what difference is there from a DFX 2-Ball putter? Is this just an older version?

the main difference between the white steel, white hot and the DFX models in the hardness of the face. the white hot's face is the softest so that is best if u mainly play on fast green or like to take a long stroke. the DFX and white steel models faces are harder which means you don't have to hit the ball as hard. its really what feels best to you. i have a white steel because i don't take that big of a swing and a white hot only made me put bad strokes on the ball. i would try and test a few out to see what suits you the best. it worked for me!

Whats in the Bag? A look into my golf bag. Vol. 2 My golf clubs.

Odyssey White Steel 2-Ball Blade Putter Right $59.99

Odyssey White Hot XG 2-Ball F7 Putter Steel Right $99.99

Odyssey White Steel 2-Ball Blade Putter Right $99.99

Ping iWi B60 Putter Steel Right $79.99

Mint Titleist California Series Coranado Putter Steel Right $241.99

TaylorMade Rossa Monte Carlo 7 AGSI+ Putter Steel Right $69.99

TaylorMade Rossa TP Siena 4-02 Putter Steel Right $139.99

Ping Pal Putter Steel Right $29.99

Odyssey Limited Edition Ti-Hot 1 Putter Steel Right $179.99

Titleist Futura Phantom Mallet 2 Putter Steel Right $139.99

Odyssey White Steel 5 Putter Golf Club Left Hand 35 Inches $54.00

Macgregor Fat Lady Swings Putter Steel Right $59.99

Nike Method Core MC3i Putter Steel Right $89.99

Ping Anser Putter Steel Other Right Black Dot $79.99

Bettinardi 2011 Studio Stock 8 Putter Steel Left $249.99

TaylorMade Rossa Monza Corza Putter Steel Left $69.99

Ping Kushin Putter Steel Right $29.99

Ping Anser Putter Steel Right $39.99

Bettinardi BB 50 Long Putter Steel Right $349.99

Mint Ping iWi B60 Putter Steel Right Black Dot $87.99

Ping i-Series Craz-E Putter Steel Right Black Dot $89.99

Odyssey Dual Force 2 #2 Putter Steel Right $59.99

Mint Ping Karsten Series Anser 2 Putter Steel Right Black Dot $76.99

Mint Odyssey White Ice Mini T Putter Steel Right $120.99

Mint Hog FGP Mallet Putter Steel Right $119.99

Ping i-Series Wack-E Putter Steel Right $79.99

Mint Never Compromise NCX Ray SFT Putter Steel Left $87.99

Ping Scottsdale Series Wolverine Putter Steel Right $119.99

Odyssey White Hot 2-Ball Putter Steel Right $79.99

Odyssey White Hot XG Rossie Putter Steel Right $69.99

Odyssey White Hot XG Marxman Blade Putter Steel Right $69.99

Ping Redwood Piper Putter Steel Right $129.99

Odyssey White Steel 2-Ball Blade Putter Steel Right $99.99

Mint Island Series 460 Mid Blade Putter Steel Regular Right $76.99

Odyssey White Steel 2-Ball Putter Left $89.99

Ping Anser 3 Putter Steel Other Right $39.99

Mint Odyssey White Ice D.A.R.T. Blade Putter Steel $131.99

Mint Yes Marilyn Putter Steel Left $76.99

NEW! NIKE METHOD CORE MC-5i STEEL 34" PUTTER RH W/HC $99.99

Mint Ping Zing 2 F Putter Steel Left $99.99

Mint Ping Pal 2F Putter Steel Right $99.99

Titleist Oil Can Santa Fe Putter Steel Right $499.99

Odyssey White Ice 2 Putter Steel Right $79.99

Cleveland 2010 Classic 1 Putter Steel Right $59.99

Ping Rite In 5BZ Putter Steel Right $119.99

Cleveland 2010 Classic 4.5 Bronze Putter Steel Right $69.99

Mint Nike Method Core MC2i Putter Steel Right $98.99

Mint Cleveland 2009 Classic 4 Putter Steel Right $76.99

Mint Never Compromise NCX Ray Tau Putter Steel Right $87.99

Mint TaylorMade EST 79 Series TM-110 Putter Steel Right $76.99

Ping iWi Zing Putter Steel Right $79.99

Ping iN Series D67 Putter Steel Right Black Dot $69.99

Ping iN Series ZB2 Putter Steel Right Black Dot $69.99

Ping Karsten Series Piper Putter Steel Right Black Dot $69.99

Ping Karsten Series C67 Putter Steel Right Black Dot $69.99

Nike Ignite 001 Putter Steel Right Orange Dot $49.99

Cleveland 2010 Classic 5.5 Putter Steel Right $59.99

Ping Redwood Piper Black Satin Putter Steel Right $129.99

TaylorMade Rossa Daytona Sport 1 Putter Steel Other Right $49.99

TaylorMade Rossa Daytona 1 AGSI+ Putter Steel Right $41.99

Titleist Scotty Cameron Studio Style Newport 2.5 Stainless Steel Body 34" Putter $189.99

RARE LH NEW ODYSSEY WHITE STEEL Tri-Ball SRT 34" PUTTER NEW HEADCOVER INCLUDED $89.99

RAM TRADITIONAL PUTTER LEFT HANDED 34.5 INCHES STEEL SHAFT $29.95

PING ISI-K IRONS SET 3-9 black dot ,S, W AND PING PAL PUTTER WITH BAG Steel $42.00

ORIGINAL!!! Ping Anser Putter / 34.25" / Steel Shaft & Golf Pride Grip $24.99

Odyssey White Steel 2-ball Putter Golf Club $43.00

Cleveland Classic Black Platinum 2 Putter Steel Shaft 35" Mint Condition $41.00

Stainless Steel Golf Clubs O-Size Junior IRON Set Size 3-4-5-6-7-8-9-P w/ Putter $59.99

MacGregor P 504 Brass Putter 35" steel shaft - PRO-LINE QUALITY-Very Nice $59.00

35.5-Inch Vintage PING PAL PUTTER, Stepped Steel Shaft, Original Grip $15.95

Scotty Cameron Santa Fe Two TeI3 34.5 inch RH Steel Putter $225.00

Apollo StepLess Putter Steel Shaft Fluted QLT .355 New $7.95

Odyssey WHITE HOT STEEL Blade Putter Headcover $9.95

PEERLESS SOFT LINK SOFT STEEL B2 PUTTER - 35" LONG - GOOD CONDITION! $28.00

Vintage IDEAL BENDER Steel Putter 34" Unusual RH $89.99

Odyssey Dual Force 664 Putter w/ Steel (34" 7/10 (D13-1-L) $29.99

Slotline 9806 Classic Blade Putter w/ Steel (33" 8/10 (D13-1-L) $34.99

Titleist Acushnet Bulls Eye Putter w/ Steel (34" 8/10 (D13-2-L) $24.99

VOIT P-96 Putter w/ Steel (34" 7/10 (D13-2-L) $24.99

Cobra Golf Melbourne II Putter 33 Inch Steel Shaft $24.99

Nike Golf Method #003 Putter 36 Inch Steel Shaft $109.99

Ping Golf Stainless Anser 2 Putter 35 Inch Steel Shaft $49.99

Ping Golf Anser Putter 35 Inch Steel Shaft $39.99

Ping Golf Stainless Anser 2 Putter 35 Inch Steel Shaft $49.99

Ping Golf Anser Putter 36 Inch Steel Shaft $39.99

Ping Golf Stainless B60 Putter 36 Inch Steel Shaft $29.99

Ping Golf Anser Putter 36 Inch Steel Shaft $39.99

Ping Golf G5i Tess Putter 36 Inch Steel Shaft $39.99

Titleist Golf Scotty Cameron Studio Style Newport 2 Putter 33 Inch Steel Shaft $139.99

Titleist Golf Scotty Cameron Studio Stainless Newport 2.5 Putter 35" Steel Shaft $159.99

Odyssey Golf White Hot XG #8 Putter 33" Steel Shaft $49.99

Ping Golf G2i Craz-e Center Shafted Putter 36" Steel Shaft $89.99

BRAND NEW "Sandstone" Adams Golf Idea A12 OS Putter RH Women's Steel Shaft 33" $29.99

ODYSSEY WHITE STEEL TRI-BALL SRT 35" PUTTER $20.51

Odyssey Black Series-i 2-Ball Putter Right-Handed Steel Golf Club $20.50

NEW ODYSSEY WHITE STEEL PUTTER HEADCOVER COVER RED $12.99

ODYSSEY RED WHITE STEEL PUTTER GOLF HEADCOVER HEAD COVER * $9.99

Odyssey White Steel 2 Ball SRT Putter Right-Handed Steel Golf Club $53.00

Odyssey White Steel 2-ball Mid Putter $135.00

Titleist Scotty Cameron Circa 62 #2 Putter Left-Handed Steel Golf Club $90.00

Custom Steel Golf address sign $29.99 FREE SHIPPING in the US. This beautiful custom steel address sign is extremely sturdy. The high quality makes for a nice addition to your home or a great gift! We will contact you for your customization after your purchase. Remember there are 5 number spaces available for customization....

Rh tour edge hp11 varsity jr set (age 12/up) $168.73 Tour Edge HP11 Varsity Junior Golf Sets Performance Right Out Of The Box HP11 Varsity is perfect for young teens who have outgrown a kids set but aren't quite ready for adult clubs. The set features a titanium matrix driver for longer drives and the maximum-allowed 460cc clubhead for a higher MOI (the club's ability to resist twisting) for increased forgivieness even on off-center hits. Tour Edge ...

Shot Putter Retro Color Sports Mens T-Shirt (Steel, Sizes X-Small - XXX-Large) This Shot Putter T-Shirt has undergone extensive quality control before reaching you. We have over 10 years experience in selling products on the internet. The items are created by us and are even customizable! Just contact our great customer service for any questions....

Tiger Thinks I'm Hot Men's Tee Shirt in 12 colors Small thru 6XL Great looking 100% cotton shirt. Please refer to our sizing chart for measurements.This design also available as a women's tee shirt, and a men's hoodie and sweat shirt in our other amazon.com listings....

Tiger Thinks I'm Hot Women's Babydoll Petite Fit Tee Shirt in 6 Colors Small thru XL Petite form-fitting babydoll style. Please refer to our sizing chart for measurements. This design also available as a regular fit women's shirt in our other amazon.com listings....

Intech Future Tour Pee Wee Putter (Right-Handed, Steel Shaft, Age 5 and Under) $24.49 The Intech Future Tour Pee Wee Heel-toe weighted Junior putter with steel shaft and bonus ball markers is designed with the beginner golfer in mind. Let your Junior get started on the right foot to a game that will last a life time!...

Executive Putting Cup $9.99 Returns made or missed putts; great gift item for any occasion, includes target flag. Uses 2 AA and 2 C batteries (not included), lightweight and portable design, no assembly required....

Intech Future Tour Junior Putter (Right-Handed, Steel Shaft, Ages 6 to 11) $19.88 The Intech Future Tour Junior Heel-toe weighted Junior putter with steel shaft and bonus ball markers is designed with the beginner golfer in mind. Let your Junior get started on the right foot to a game that will last a life time!...

The Vintage Era of Golf Club Collectibles: Identification & Value Guide $14.75 Focuses on the vintage era from the 1920s through the 1940s. Over 450 color photos. Main sections include woods, irons, putters, adjustable clubs, fancy club faces, wedges and utility irons, shafts and grips comparisons, grading and condition scales, 2001 values, and a glossary. Manufacturers represented include Allied, MacGregor, Wilson, Spalding, and McGill. 2002 values....

Confidence GOLF Mens POWER Hybrid Club Set & Stand Bag $99.95 460cc titanium driver with 12° loft for added forgiveness, fitted with steel shaft, complete with headcover. 24 degree hybrid iron with a steel shaft, replaces the difficult to hit longer irons. 6-7-8-9-PW easy to hit cavity back irons with steel shafts. Putter fitted with steel shaft. Upgraded stand bag with auto pop legs, plenty of external storage and raincover included as standard....

GolfWorks Premium Steel Putter Shaft $9.99 Premium steel stepless putter shafts.

Golfsmith Stepless Steel Putter Shaft $5.99 Snake Eyes Stepless Steel Putter Shaft: This sleek Stepless Steel Putter Shaft is designed to fit all .370 in. bore putters. Works great in both in-hosel designs that require a straight putter shaft and over-hosel designs that require a precise fit.

Ping Pengyo Used Putter $29.99 This stainless steel Ping putter sets up great at address and could be your key to MAKING MORE PUTTS. This putter would make a great addition to your PING PUTTER COLLECTION.

Technica DX470 Putter - Clubhead $6.95 The Technica DX-470 putter takes oversized to a whole new level as it is 50% wider than a standard putter. Constructed of durable stainless steel for long-lasting beauty, the DX470 redistributes the weight around the perimeter to create an enormous moment

Nike Method Concept Putter $199.99 The Method Concept Putter is a multi-material putter that combines a lightweight aluminum face and a high-mass steel body. This positions the center of gravity farther back andlower in the clubhead. The putter has a high MOI delivering a faster roll and giving it the stability of a larger mallet, but has a small footprint that maintains a blade like appearance.

Heavy Putter Lightweight N1 Putter $119.95 Heavy Putter Lightweight N1 Putter This blade design, similar to the classic bullseye, incorporates the tour proven patented weighting technology in a new LITE-WEIGHT 600gm category. The N1-L is a toe-droop blade with a center shaft orientation. Due to the design, this putter will work for both Right and Left hand golfers. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a PVD Black or Satin finish. Each LITE-WEIGHT uses a proprietary shaft with a 65 gram weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the wristy action in the stroke. Heavy Putter uses a newly developed Winn Mid-size grip with a V17 Super Soft compound with a cord base material which produces an extremely tacky but firm feel, preferred by better golfers. Features Finish: Black PVD or Satin Stock lengths 32 - 36 Dexterity: Right and Left Hand Total Putter Weight = +- 600 grams Head Weight = +- 375 grams Back Weighting System weight in grip end of shaft = 65 grams Proprietary Steel Shaft Custom Winn Mid-Size Grip Custom Head Cover included Stainless Steel Material CNC Milled Face Loft = 3 deg. Lie Angle = 70 deg.

True Temper Stepless .355 Putter Shaft $8.99 True Temper Tap Tip Putter Shaft .355 in.: This top-quality steel putter shaft is designed for .355 in. tapered hosel putter heads.

Nike Method Core Putter $129.99 Nike Method Core Putter The Nike Method Core Putter has notched two major championship wins on the Tour. Method Putter Technology reaches the whole field. What you get is a putter that combines soft polymer and milled steel grooves to generate faster, more controlled forward roll at impact. What you wont get is backspin that causes skidding and hopping and the less putts hop, the more puts drop.

Odyssey White Steel 2-Ball Blade Used Putter $54.99 The Odyssey White Steel putter utilizes the same technology as the White Hot putters, including the same urethane insert. They have also placed milled steel in the striking area of the face to create the consistency of steel, with the feel of a soft, urethane insert putter.

Nickel Putter $295.95 Nickel Putter This innovative precision Putter is not only captivating with perfect balance but also with extremely high swing stability and great ball control in the follow-through. We achieve this with additional weighting added to either side of the stroke surface. Besides the specially lengthened, continuous aim line, which traverses the entire putter at ball level, lends the No1 a feeling of security in the address position. Marking made easy: Due to our patented technology you never have to bend over on the green again: It's as simple as this: mark the ball and pick it up without bending down and the other way round: reposition the ball precisely and remove the marker at the same time. Features Additional Side Weights: The weights are embedded right and left, directly behind the insert, shifting the centre of gravity forwards. This ensures a high level of swing stability and good ball control in the follow-through, having an overall positive effect on the putting behavior. Insert: The insert is made from a special alloy and guarantees excellent ball contact. Specially lengthened aim line runs at ball level and gives a feeling of security in the address position. Balancer Weight: 12g The balancer is made of hard-wearing and extraordinarily robust synthetic material, designed to hold its form. The balancer can be removed and replaced with one simple movement of the hand. Marker The marker is made of magnetized stainless steel and is held in position by a magnet integrated into the putter head. Specs Weight: 350g Lie: 70° Stroke surface angle: 3 Deg. Hard, surface-coated aluminium. Using the most up-to-date computer controlled engineering CNC Techniques for First Class Quality. Additional Photos If you have any questions about this product or would like to order by phone, please call us Toll Free at 888-733-8383. We look forward to hearing from you!

Marilyn Golf Club - Putter $139.95 The C-Groove Marilyn model is a mallet-style putter made of 304 stainless steel. It features a compact mallet head that is face-balanced and perimeter weighted.

Axis 1 Putter - Umbra $299.95 Axis 1 Putter - Umbra Axis 1 Golf offers the first 100% perfectly balanced putter in the game. Because the Axis 1 Umbra putter is perfectly balanced, it won't naturally open-up, resulting in more on-line putts and lower scores. Considering how often you pull use your putter each round, shouldn't you use the putter that is engineered to give you the best chance to make each and every putt? Axis 1 was able to make a perfectly balanced putter by pushing the weight forward with a patented heel counterweight that, for the very first time, places the center of gravity right on the center of the striking face and perfectly aligned with the axis of the shaft. Features: Axis 1 Putter - Umbra &#8226 350 grams &#8226 Modern mallet &#8226 CNC milled face for soft yet solid feel &#8226 17-4PH Stainless Steel with black ion plating for enhanced durability &#8226 Stainless Steel shaft with vibration dampening core &#8226 Stainless Steel counterweight screws for perfect final balance calibration &#8226 Premium Winn Standard grip for more feel &#8226 Individually balanced Try this with your putter Grab your putter and address a golf ball Remove your right hand if a righty and softly support the club halfway down the shaft with an opened hand Gently release the pressure of your left hand See what happens? The club face automatically opens up, which results in trouble; pushed putts, off-line putts and ultimately higher scores. The problem is your putter, like every other putter, is not perfectly balanced, because the center of gravity is not on the sweet spot of the club face and aligned with the axis of the shaft. But then again there is only one putter that provides that. AND if you had an Axis1: If you did the same drill with an Axis1 putter you'd witness a much different result. The clubface would never open up. Never. Even with a relaxed grip, the Axis1 clubface remains on-line and on-target. Again, no other putter can do that. Because no other putter has the center of gravity right on the sweet spot of the clubface and perfectly aligned with the axis of the shaft. Putter Torque Rating The PTR scientifically measures and rates the static torque about the axis of a putter shaft . In golfers' terms: how prone certain putters are to “opening up” when addressing and swinging the club. Or you just could think of PTR like this- it measures how prone each specific model is to opening up and forcing you to push your putts. Testimonials Just thought I would let you know that this weekend I had my best round in 15 years and was putting lights-out with your putter! In fact, I suspect my brother-in-law will be ordering one after watching my putting. ? Dave Dawsey

Long-Broomstick Putter Adapter $3 These precision cast, stainless steel adapters are designed to fit virtually any putter with a 0.370" parallel bore 90° socket and transform it into an entirely different putter regardless of manufacturer. Each has an attractive neutral bead blast finish and three styles to choose from. Directions: Simply test fit stem into the putter’s socket as it should be a tight fit. If it does not fit, lightly hand sand stem until it is snug. Apply quick setting epoxy to stem, seat and align adapter and allow the epoxy to harden. Lastly, install the new shaft – it’s that simple!The Long-Broomstick adapter converts the lie angle to 79° for use as a long or broomstick putter as the post is designed to fit the inside diameter of the Apollo 53 inch long putter shaft. Weighs 20g and these will work for either a RH or LH putter.

Yes Callie Putter $99.99 By gripping the back of the ball and lifting it forward on impact, the C-Grooves of a Yes putter create almost instant stabilization, causing the ball to roll forward much sooner than any other putter. In fact, as much as six times sooner.The Callie model is a moderate toe-down, traditional blade style putter made of 304 stainless steel. It offers a single sight line in the back cavity for alignment. Callie has been one of the most popular Yes! models for years.

Heavy Putter Black CX2 $99.98 The new Heavy Putter MID-WEIGHT Series combines classic designs with innovative balanced weight technology. See Why 7 out of 10 golfer's prefer the new MID-WEIGHT over the putter in their bags. This classic blade design incorporates the tour proven patented weighting technology in a new MID-WEIGHT (750gm) category. The CX2 is a face balanced blade with a plumber's neck hosel and has a full shaft offset. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a PVD Black or

Never Compromise Dinero Putter $299.99 Never Compromise Dinero Putter The Never Compromise Dinero Putter features four classic designs to choose from. Each is individually machined with a unique artwork on the sole. All four models are forged using 303 stainless steel. The combination of the soft material and the forged grain structure provides unprecedented feel at impact. Machined to perfection, these putters hold some of the tightest tolerances in the industry. Classic design and modern construction give these putters a unique look, appreciated by the worlds most demanding and refined customers. Each putter is truly a masterpiece.

White Polymer Insert Putter - Clubhead $12.45 This putter is quality constructed of stainless steel and feature a soft, white polymer insert for superior feel and touch. Faces are milled for flatness. Requires either a straight .370" putter shaft

Snake Eyes 3500 SL Putter $49.99 Snake Eyes 3500 SL Putter The Snake Eyes 3500 SL Putter has a stainless steel head and a soft urethane insert. The milled face provides consistent ball striking performance.

Nike Method Concept Used Putter $164.99 The Method Concept Putter is a multi-material putter that combines a lightweight aluminum face and a high-mass steel body. This positions the center of gravity farther back andlower in the clubhead. The putter has a high MOI delivering a faster roll and giving it the stability of a larger mallet, but has a small footprint that maintains a blade like appearance.

Heavy Putter Mid Weight Q2 Putter $119.95 Heavy Putter Mid Weight Q2 Putter This classic blade design incorporates the tour proven patented weighting technology in a new MID-WEIGHT 750gm category. The Q2-M is a toe-droop blade with a plumber's neck hosel and has a full shaft of offset. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a PVD Black or Satin finish. Each MID-WEIGHT uses a proprietary shaft with a 200 gram weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the wristy action in the stroke. Heavy Putter uses a newly developed Winn Mid-size grip with a V17 Super Soft compound with a cord base material which produces an extremely tacky but firm feel, preferred by better golfers. Features: * Finish: Black PVD or Satin * Stock lengths 32" - 36" * Dexterity: Right Hand Only * Total Putter Weight = +- 750 grams * Head Weight = +- 400 grams * Weight Management System weight in grip end of shaft = 200 grams * Proprietary Steel Shaft * Custom Winn Mid-Size Grip * Custom Head Cover included * Stainless Steel Material * CNC Milled Face * Loft = 3? * Lie Angle = 70?

Heavy Putter Heavy Weight Q2 Putter $119.95 Heavy Putter Heavy weight Q2 Putter This classic blade design incorporates the tour proven patented weighting technology in a new HEAVY-WEIGHT 900gm category. The Q2 is a toe-droop blade with a plumber's neck hosel and has a full shaft of offset. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a PVD Black finish. Each HEAVY-WEIGHT uses a proprietary shaft with a 250 gram weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the wristy action in the stroke. Heavy Putter uses a newly developed Winn Mid-size grip with a V17 Super Soft compound with a cord base material which produces an extremely tacky but firm feel, preferred by better golfers. Features Finish: Black PVD Stock lengths 32 - 36 Dexterity: Right Total Putter Weight = +- 900 grams Head Weight = +- 465 grams Back Weighting System weight in grip end of shaft = 250 grams Proprietary Steel Shaft Custom Winn Mid-Size Grip Custom Head Cover included Stainless Steel Material CNC Milled Face Loft = 3 deg. Lie Angle = 70 deg.

Axis 1 Putter - Eagle $299.95 Axis 1 Putter - Eagle Axis 1 Golf offers the first 100% perfectly balanced putters in the game. Because Axis 1 putters are perfectly balanced, they don't naturally open-up, resulting in more on-line putts and lower scores. Considering how often you pull out your putter, shouldn't you use the one uniquely engineered to give you the best chance to make each and every putt? Axis 1 was able to make a perfectly balanced putter by pushing the weight forward with a patented heel counterweight that, for the very first time, places the center of gravity right on the center of the striking face and perfectly aligned with the axis of the shaft. Features: Axis 1 Putter - Eagle &#8226 340 grams &#8226 Classic blade &#8226 I CNC milled copper insert for a softer feel &#8226 17-4PH Stainless Steel &#8226 Stainless Steel shaft with vibration dampening core &#8226 Stainless Steel counterweight screws for perfect final balance calibration &#8226 Premium Winn Midsize grip for more stability &#8226 Individually balanced Try this with your putter Grab your putter and address a golf ball Remove your right hand if a righty and softly support the club halfway down the shaft with an opened hand Gently release the pressure of your left hand See what happens? The club face automatically opens up, which results in trouble; pushed putts, off-line putts and ultimately higher scores. The problem is your putter, like every other putter, is not perfectly balanced, because the center of gravity is not on the sweet spot of the club face and aligned with the axis of the shaft. But then again there is only one putter that provides that. AND if you had an Axis1: If you did the same drill with an Axis1 putter you'd witness a much different result. The clubface would never open up. Never. Even with a relaxed grip, the Axis1 clubface remains on-line and on-target. Again, no other putter can do that. Because no other putter has the center of gravity right on the sweet spot of the clubface and perfectly aligned with the axis of the shaft. Putter Torque Rating The PTR scientifically measures and rates the static torque about the axis of a putter shaft . In golfers' terms: how prone certain putters are to “opening up” when addressing and swinging the club. Or you just could think of PTR like this- it measures how prone each specific model is to opening up and forcing you to push your putts. Testimonials Just thought I would let you know that this weekend I had my best round in 15 years and was putting lights-out with your putter! In fact, I suspect my brother-in-law will be ordering one after watching my putting. ? Dave Dawsey FYI?Doug Ross and I won our flight and came

Acer CB3 Putter - Clubhead $19.95 Meticulously designed using the latest CAD software, the concept was to reverse engineered the putter shape. After a recent rules change by the USGA, the putter face no longer needs to be greater than the front-to-back dimension. Even higher handicapped golfers do not strike the ball very far from the center of the putter?s face by a great amount. By reducing the material used in the face and redistributing the weight in the rear corners, the result is a putter that will greatly reduce twisting over a conventional shaped design. Even though the face measures 68mm (2 2/3?), it is more than ample length not to appear intimidating at address. Just like the head of a hammer is not much larger than the head of a nail, by placing more weight away from the striking surface creates an extremely balanced putter. The head is precision cast from stainless steel and features a soft, black aluminum insert. Requires a curved putter shaft AP46CP that will result into a face balanced finished product. Conforms with USGA Rules. You may also like:CB Putter Headcover $2.95

True Temper Unitized Putter Shaft .370 $2.97 True Temper Unitized Putter Shaft .370 in.: This chrome-plated parallel tip shaft is made of quality steel, and is designed for .370 in. putter heads.

Heavy Putter Q2 Lite Black Putter $59.97 This classic blade design incorporates the tour proven patented weighting technology in a new LITE-WEIGHT (600gm) category. The Q2-L is a toe-droop blade with a plumber's neck hosel and has a full shaft of offset. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a PVD Black or Satin finish.

The Putter $9.99 Ethan Harper The Putter - Art Print

Heavy Putter K4-MW Mid Weight Black Used Putter $29.99 The Heavy Putter Mid-Weight Series is constructed of 304 stainless steel with a CNC milled face. Each Mid-Weight putter uses a proprietary 200-gram shaft, providing more control of the stroke and a balance point 75-percent higher than conventional putters to reduce wrist-movement. Research has shown that 7 out of 10 golfers perfer the mid-weight putter over any other putter.

Scotty Cameron California Putter $299.99 Scotty Cameron California Putter The Scotty Cameron California Putter has a classic design with modern weighting. This club provides clean aesthetics while offering better balance and higher inertia for a solid feel. Select Weight Technology offers greater choices for length and weight to enhance performance for all types of players. Milled from soft, 303 stainless steel, the California putter has a soft sound and feel that promotes precise distance control. A honey-dipped finish provides a deep, rich non-glare appearance while the stepless steel shaft provides a clean, uninterrupted look at the ball in the address position as well as promoting better putter head feel throughout the stroke. The black Cameron Tour grip creates a soft, controlled feel for precise feedback. Additional Features: Draft Sole Design: Keeps the putter square in the playing position for proper alignment High-Toe Profile: Aids alignment and eliminates the tendency to raise the toe at address causing a player to aim the putter to the left of the target Models: Monterrey- A double-step flange with a pocket and plumbing neck Coronado- A double-step flange with a flow neck Sonoma- A compact mallet with a plumbing neck Del Mar- A mid mallet with a flow neck

Paragon Merlin Putter $24.95 Paragon Merlin Putters Features Classic stainless steel designs Face balanced for ultimate feel and control Offset neck fitted with Paragon Tour steel putter shafts Paragon Tour Players putter grips Color Choices If you have any questions about this product or would like to order by phone, please call us Toll Free at 888-733-8383. We look forward to hearing from you!

Heavy Putter Black K4 $99.98 The new Heavy Putter MID-WEIGHT Series combines classic designs with innovative balanced weight technology. See Why 7 out of 10 golfer's prefer the new MID-WEIGHT over the putter in their bags. This classic heel shafted "toe-droop" blade with a thin top line incorporates the tour proven patented weighting technology in a new MID-WEIGHT (750gm) category. The K4 is a toe droop blade with a short slant neck hosel with a half-shaft offset. The putter is constructed of Stainless Steel and has a CNC milled face a

Golfsmith Putter Bending Machine $269.99 Golfsmith Putter Bending Machine An extremely great value, this Putter Bending Machine features a unique lie/loft angle measuring protractor using a parallel bar system, that is both fast and accurate. The machine fits almost every style of putter heads via an easy fixture with soft, secure, brass clamping mechanisms, has an easy-to-read loft & lie indicator and is made of solid S45C precision-machined steel. Can bolt onto the Golfsmith Universal Bending Stand (#240791), or mount onto your workbench. Instruction manual (1.5Mb) and Assembly instructions (40kb)

TaylorMade TP by Kia Ma Putter $299.99 TaylorMade TP by Kia Ma Putter The TaylorMade TP Kia Ma Putter is designed by the skilled hands and practiced eye of a genius. It has a pure, clean and elegant look that pleases the eye and every edge, curve and surface is composed with the utmost precision, balance and care. It is milled from end to to end of soft 1018 carbon steel and finished in Midnight Black. The feel, sound and sensitivity are unlike any other putter. Additional Features: Grip Color: Black Length: 34-35 inches Putter Type: Blade

Plumbers Neck Putter Adapter $3 These precision cast, stainless steel adapters are designed to fit virtually any putter with a 0.370" parallel bore 90° socket and transform it into an entirely different putter regardless of manufacturer. Each has an attractive neutral bead blast finish and three styles to choose from. Directions: Simply test fit stem into the putter’s socket as it should be a tight fit. If it does not fit, lightly hand sand stem until it is snug. Apply quick setting epoxy to stem, seat and align adapter and allow the epoxy to harden. Lastly, install the new shaft – it’s that simple!The Plumbers Neck adapter converts a RH putter designed to have a compound triple bent shaft with the proper lie/offset and accept a straight shaft. Weighs 44g. Creates a 72 degree lie angle.

Slant Hosel Putter Adapter $3 These precision cast, stainless steel adapters are designed to fit virtually any putter with a 0.370" parallel bore 90° socket and transform it into an entirely different putter regardless of manufacturer. Each has an attractive neutral bead blast finish and three styles to choose from. Directions: Simply test fit stem into the putter’s socket as it should be a tight fit. If it does not fit, lightly hand sand stem until it is snug. Apply quick setting epoxy to stem, seat and align adapter and allow the epoxy to harden. Lastly, install the new shaft – it’s that simple!The Slant Hosel adapter converts a RH putter designed to have a compound triple bent shaft with the proper lie and reduced or non-offset configuration and accept a straight shaft. Weighs 44g. Creates a 72 degree lie angle.

Heavy Putter D-3 Mid-Weight Putter $119.95 Heavy Putter D-3 Mid-Weight Putter This high MOI mallet design incorporates the tour proven patented weighting technology in a new MID-WEIGHT 750gm category. The D1-M is face balanced and has a center shaft orientation. This putter features a cutting-edge design with a sound engineering purpose. The unique head design raises the center of gravity, which together with the elongated alignment line, encourages consistent sweet spot contact. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a PVD Black finish. Each MID-WEIGHT uses a proprietary shaft with a 200 gram weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the wristy action in the stroke. Heavy Putter uses a newly developed Winn Mid-size grip with a V17 Super Soft compound with a cord base material which produces an extremely tacky but firm feel, preferred by better golfers. Features Finish: Black PVD Dexterity: Right Hand Only Total Putter Weight = +- 750 grams Head Weight = +- 400 grams Back Weighting System weight in grip end of shaft = 200 grams Proprietary Steel Shaft Custom Winn Mid-Size Grip Custom Head Cover included Stainless Steel Material CNC Milled Face Loft = 3? custom loft adjustments +- 2 degrees Lie Angle = 70? custom lie adjustments +- 2 degrees

Heavy Putter D-1 Mid-Weight Putter $119.95 Heavy Putter D-1 Mid-Weight Putter This high MOI mallet design incorporates the tour proven patented weighting technology in a new MID-WEIGHT 750gm category. The D1-M is face balanced and has a center shaft orientation. This putter features a cutting-edge design with a sound engineering purpose. The unique head design raises the center of gravity, which together with the elongated alignment line, encourages consistent sweet spot contact. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a PVD Black finish. Each MID-WEIGHT uses a proprietary shaft with a 200 gram weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the wristy action in the stroke. Heavy Putter uses a newly developed Winn Mid-size grip with a V17 Super Soft compound with a cord base material which produces an extremely tacky but firm feel, preferred by better golfers. Features Finish: Black PVD Dexterity: Right Hand Only Total Putter Weight = +- 750 grams Head Weight = +- 400 grams Back Weighting System weight in grip end of shaft = 200 grams Proprietary Steel Shaft Custom Winn Mid-Size Grip Custom Head Cover included Stainless Steel Material CNC Milled Face Loft = 3? custom loft adjustments +- 2 degrees Lie Angle = 70? custom lie adjustments +- 2 degrees

Heavy Putter P-3 Mid-Weight Putter $119.95 Heavy Putter P-3 Mid-Weight Putter This high MOI blade design incorporates the tour proven patented weighting technology in a new MID-WEIGHT 750gm category. The P3-M is face balanced and has a double bend, heel mounted shaft orientation and has a half shaft of offset. This putter features a deeper cavity than traditional blade designs to aid in alignment. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a PVD Black finish. Each MID-WEIGHT uses a proprietary shaft with a 200 gram weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the wristy action in the stroke. Heavy Putter uses a newly developed Winn Mid-size grip with a V17 Super Soft compound with a cord base material which produces an extremely tacky but firm feel, preferred by better golfers. Features Finish: Black PVD Dexterity: Right Hand Only Total Putter Weight = +- 750 grams Head Weight = +- 400 grams Back Weighting System weight in grip end of shaft = 200 grams Proprietary Steel Shaft Custom Winn Mid-Size Grip Custom Head Cover included Stainless Steel Material CNC Milled Face Loft = 3? custom loft adjustments +- 2 degrees Lie Angle = 70? custom lie adjustments +- 2 degrees

Nike Method Putter 002 $249.95 Nike Method Putter After two major championship wins on tour, Method putter technology reaches the whole field. What you get is a putter that combines soft polymer and milled steel grooves to generate faster, more controlled forward roll at impact. What you won't get is backspin that causes skidding and hopping. And the less putts hop, the more putts drop. Info Specs: Nike Method Putter Club Loft Lie Length RHLH 001 2° 71° 333435 both 002 2° 71° 333435 RH only 003 2° 71° 333435 RH only 004 2° 71° 333435 RH only 005 2° 71° 333435 both

Nike Method Putter 003 $249.95 Nike Method Putter After two major championship wins on tour, Method putter technology reaches the whole field. What you get is a putter that combines soft polymer and milled steel grooves to generate faster, more controlled forward roll at impact. What you won't get is backspin that causes skidding and hopping. And the less putts hop, the more putts drop. Info Specs: Nike Method Putter Club Loft Lie Length RHLH 001 2° 71° 333435 both 002 2° 71° 333435 RH only 003 2° 71° 333435 RH only 004 2° 71° 333435 RH only 005 2° 71° 333435 both

Nike Method Putter 005 $249.95 Nike Method Putter After two major championship wins on tour, Method putter technology reaches the whole field. What you get is a putter that combines soft polymer and milled steel grooves to generate faster, more controlled forward roll at impact. What you won't get is backspin that causes skidding and hopping. And the less putts hop, the more putts drop. Info Specs: Nike Method Putter Club Loft Lie Length RHLH 001 2° 71° 333435 both 002 2° 71° 333435 RH only 003 2° 71° 333435 RH only 004 2° 71° 333435 RH only 005 2° 71° 333435 both

Nike Method Putter 004 $249.95 Nike Method Putter After two major championship wins on tour, Method putter technology reaches the whole field. What you get is a putter that combines soft polymer and milled steel grooves to generate faster, more controlled forward roll at impact. What you won't get is backspin that causes skidding and hopping. And the less putts hop, the more putts drop. Info Specs: Nike Method Putter Club Loft Lie Length RHLH 001 2° 71° 333435 both 002 2° 71° 333435 RH only 003 2° 71° 333435 RH only 004 2° 71° 333435 RH only 005 2° 71° 333435 both

Nike Method Putter 001 $249.95 Nike Method Putter After two major championship wins on tour, Method putter technology reaches the whole field. What you get is a putter that combines soft polymer and milled steel grooves to generate faster, more controlled forward roll at impact. What you won't get is backspin that causes skidding and hopping. And the less putts hop, the more putts drop. Info Specs: Nike Method Putter Club Loft Lie Length RHLH 001 2° 71° 333435 both 002 2° 71° 333435 RH only 003 2° 71° 333435 RH only 004 2° 71° 333435 RH only 005 2° 71° 333435 both

STX ProFIT 4 Putter $189.99 STX ProFIT 4 Putter The STX ProFIT 4 Putter features interchangeable inserts to adapt to all playing conditions. The ProFIT 4 comes with the black insert installed and adjustment tool and offers face balance weighting in a blade style putter. STX proprietary soft face technology provides superior directional control, decreased ball skid and reduced ball deformation and compression. STX insert materials have a high coefficient of friction to produce topspin and get the ball rolling sooner than any competitor. The ProFIT 4 is classically styled, milled from 17-4 stainless steel and has a dramatic Black PVD finish that complements the stylish design. The ProFIT 4 features an exclusive black and white Golf Pride grip and a top of the line STX head cover. Additional Features: Interchangeable Insert Customizing Kit Sold Separately. Weight: 350 Grams Plumbers neck hosel ProFit Customizing Kit is included with the putter

Heavy Putter Mid Weight Tour Series Silver Belly Putter $249.99 Heavy Putter Mid-Weight Tour Series Belly Silver Putter The Heavy Putter Mid-Weight Series Belly Long Silver Putter incorporates the Tour-proven patented weighting technology in a new Mid-Weight (750gm) category. The Q2-M is a toe-droop blade with a plumbers neck hosel. The putter is constructed of stainless steel and has a CNC-milled face and uses a proprietary shaft with a 200-gram weight inserted in the butt end of the shaft. This creates the necessary weight to give the golfer more control of the stroke while producing a balance point 75% higher than conventional putters, eliminating the wristy-action in the stroke.

Cleveland Classic Bronze Putter $89.99 Cleveland Classic Bronze Putter The Cleveland Classic Bronze Putter is designed with a copper-infused face insert and 17-4 stainless steel for a softer yet responsive feel. The classic red grip enhances feel and control while heel-toe weighting increases the moment of inertia for added forgiveness. It is completed with a hand-polished bronze finish, which minimizes glare and provides a long lasting durable look. Additional Features: Shaft: Cleveland Golf

Yes! Marilyn Used Putter $44.99 The Yes Golf Marilyn putter features a uniquely milled striking zone on the face which is designed to get the ball rolling smoother and sooner. The CGroove Marilyn model is a mallet style putter made of 304 stainless steel. It features a large cavity back head that is face balanced and perimeter weighted. Many professional golfers have used the CGroove putters in competition and had much success.

Yes! Olivia Used Putter $29.99 The Yes Golf CGroove putter features a uniquely milled striking zone on the face which is designed to get the ball rolling smoother and sooner The CGroove Olivia model is a facebalanced malletstyle putter made of 304 stainless steel It features a threetiered weighting system with quickchange tools Many professional golfers have used the CGroove putters in competition and had much success

Adams A7 Select Putter $69.99 Adams A7 Select Putter The Adams A7 Select Putter Features a soft stainless-steel head construction, precision micro-milled faces and co-molded urethane technology (CUT Design) inserts for enhanced feel and weight distrubution. The 60 Series has a 345-gram stainless steel heel/toe blade that features a classic plumbers neck hosel with a full shaft offset. The 61 Series features a high toe design with a traditional 345-gram blade putter while the flowing S-neck hosel has a half shaft of offset. The 62 Series is constructed of 355 grams of soft-cast stainless steel and the high MOI of this mallet design features perimeter weighting, multiple alignment aids and a classic plumbers neck hosel with a full shaft of offset. The 64 Series has a true heel-shafted blade design and this 305-gram stainless steel head features a three-quarter shaft offset.

Elite Series II Putter $469.95 Elite Sports Dead On Series II Putter Consumers on the whole have been spending upwards of $400 - $500 on drivers which may be used in a maximum of 15 holes. The putter, on the other hand, is used on virtually every hole, unless someone chips in a shot. There is almost a direct correlation between a persons handicap and the amount of putts they make during a round, so it only makes sense to focus on the most important part of your game - the short one. We at Elite Sport Products, L.P. have developed the premier club to lower your scores. The putter head component is machined out of a solid block of 17-4 PH stainless steel. The geometry of this piece includes an internal cavity in the sweet spot of the putter, which provides a larger moment of inertia in the putting stroke plane. The face of the putter head features an abrasive blast finish which provides exceptional grip to the golf ball. This component is passivated to provide exceptional corrosion resistance. The rear wing geometry is highlighted by a group of ?accelerating arrows? down the exact center of this component which provide unparalleled alignment in your set-up. A ?peep-sight? in the rear wing ensures that the putter head location is directly under or slightly ahead of your eyes. And the rear wings contain cavities for the heavier weights to be installed at the periphery of the assembly, which again, increase the moment of inertia of the putter along the plane of the putting stroke. The rear wing is manufactured out of a block of solid 6061-T6 aircraft grade aluminum. Putter Features Accelerating Arrows One of the unique features of the Dead On putter is the geometry of a series of accelerating arrows through the center of this putter. These provide the golfer with two unique tools to help their stroke: A Superior Alignment System Accelerating Arrows Although the golf industry has long been searching for a better method of aiding the golfer in the alignment of his clubhead before making a putting stoke, it has not happened until now. Never before had there been an easier and more natural method of aligning up the putter head to its target. The sculpted arrows significantly assist both the average golfer as well as the touring professional by providing an alignment tool that is second to none. It is a natural thing for hand-eye coordination to aim this putter, using the arrows, to the intended direction. Not only does this work at initial set-up, but there is a self-correcting movement that occurs during the stoke, due to ones peripheral vision, that tends to correct any misalignment that is made during the backstroke or forward stoke. The arrow geometry also provides a method for increasing throug

Elite Series III Putter $369.95 Elite Sports Dead On Series III 370 Gram Putter Consumers on the whole have been spending upwards of $400 - $500 on drivers which may be used in a maximum of 15 holes. The putter, on the other hand, is used on virtually every hole, unless someone chips in a shot. There is almost a direct correlation between a persons handicap and the amount of putts they make during a round, so it only makes sense to focus on the most important part of your game - the short one. We at Elite Sport Products, L.P. have developed the premier club to lower your scores. The putter head component is machined out of a solid block of 17-4 PH stainless steel. The geometry of this piece includes an internal cavity in the sweet spot of the putter, which provides a larger moment of inertia in the putting stroke plane. The face of the putter head features an abrasive blast finish which provides exceptional grip to the golf ball. This component is passivated to provide exceptional corrosion resistance. The rear wing geometry is highlighted by a group of ?accelerating arrows? down the exact center of this component which provide unparalleled alignment in your set-up. A ?peep-sight? in the rear wing ensures that the putter head location is directly under or slightly ahead of your eyes. The rear wing is manufactured out of a block of solid 6061-T6 aircraft grade aluminum. Putter Features Accelerating Arrows One of the unique features of the Dead On putter is the geometry of a series of accelerating arrows through the center of this putter. These provide the golfer with two unique tools to help their stroke: A Superior Alignment System Accelerating Arrows Although the golf industry has long been searching for a better method of aiding the golfer in the alignment of his clubhead before making a putting stoke, it has not happened until now. Never before had there been an easier and more natural method of aligning up the putter head to its target. The sculpted arrows significantly assist both the average golfer as well as the touring professional by providing an alignment tool that is second to none. It is a natural thing for hand-eye coordination to aim this putter, using the arrows, to the intended direction. Not only does this work at initial set-up, but there is a self-correcting movement that occurs during the stoke, due to ones peripheral vision, that tends to correct any misalignment that is made during the backstroke or forward stoke. The arrow geometry also provides a method for increasing throughput, or follow through in hisher stroke. Along with the ability to align the putter head in the desired direction, the geometry of the multiple arrows increases as they approach the

Acer CB3 Putter - Custom Assembled $39.95 Meticulously designed using the latest CAD software, the concept was to reverse engineered the putter's shape. After a recent rules change by the USGA, the putter's face no longer needs to be greater than the front-to-back dimension. Even higher handicapped golfers do not strike the ball very far from the center of the putter's face by a great amount. By reducing the material used in the face and redistributing the weight in the rear corners, the result is a putter that will greatly reduce twisting over a conventional shaped design. Even though the face measures 68mm (2-2/3"), it is more than ample length not to appear intimidating at address. Just like the head of a hammer is not much larger than the head of a nail, by placing more weight away from the striking surface creates an extremely balanced putter. The head is precision cast from stainless steel and features a soft, black aluminum insert. Assembled with curved putter shaft that results into a face balanced finished product. Base price assembled with Apollo Putter shaft and Karma Black Velvet Paddle Putter Grip. Comes with FREE CB Putter Headcover! Click here for more information on the Acer CB3 Putter

Heavy Putter Light Weight L3 Putter $119.95 Heavy Putter Light Weight L3 Putter This traditional small mallet design incorporates the tour proven patented weighting technology in a new LITE-WEIGHT 600gm category. The L3-L is face balanced and has a heel mounted double bend shaft with a half shaft of offset. A unique three-line alignment system center top line and two framing line in the lower channel. The thin-face design promotes crisper feel at impact and improves MOI. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a PVD Black or Satin finish. Each LITE-WEIGHT uses a proprietary shaft with a 65 gram weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the wristy action in the stroke. Heavy Putter uses a newly developed Winn Mid-size grip with a V17 Super Soft compound with a cord base material which produces an extremely tacky but firm feel, preferred by better golfers. Features Finish: Black PVD or Satin Stock lengths 32 - 36 Dexterity: Right and Left Hand Total Putter Weight = +- 600 grams Head Weight = +- 375 grams Back Weighting System weight in grip end of shaft = 65 grams Proprietary Steel Shaft Custom Winn Mid-Size Grip Custom Head Cover included Stainless Steel Material CNC Milled Face Loft = 3 deg. Lie Angle = 70 deg.

Heavy Putter Heavy Weight L3 Putter $119.95 Heavy Putter Heavy weight L3 Putter This traditional small mallet design incorporates the tour proven patented weighting technology in a new HEAVY-WEIGHT 900gm category. The L3-H is face balanced and has a heel mounted double bend shaft with a half shaft of offset. A unique three-line alignment system center top line and two framing line in the lower channel. The thin-face design promotes crisper feel at impact and improves MOI. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a PVD Black or Satin finish. Each HEAVY-WEIGHT uses a proprietary shaft with a 250 gram weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the wristy action in the stroke. Heavy Putter uses a newly developed Winn Mid-size grip with a V17 Super Soft compound with a cord base material which produces an extremely tacky but firm feel, preferred by better golfers. Features Finish: Black PVD Stock lengths 32 - 36 Dexterity: Right Total Putter Weight = +- 900 grams Head Weight = +- 465 grams Back Weighting System weight in grip end of shaft = 250 grams Proprietary Steel Shaft Custom Winn Mid-Size Grip Custom Head Cover included Stainless Steel Material CNC Milled Face Loft = 3 deg. Lie Angle = 70 deg.

Heavy Putter Mid Weight Tour Series Silver Putter $199.99 Heavy Putter Mid-Weight Series Silver Finish Putter The Heavy Putter Mid-Weight Series Silver Finish Putter incorporates the Tour-proven patented weighting technology in a new Mid-Weight (750gm) category. The Q2-M is a toe-droop blade with a plumbers neck hosel. The putter is constructed of stainless steel and has a CNC-milled face and uses a proprietary shaft with a 200-gram weight inserted in the butt end of the shaft. This creates the necessary weight to give the golfer more control of the stroke while producing a balance point 75% higher than conventional putters, eliminating the wristy-action in the stroke. Heavy Putter uses a newly developed Winn mid-size grip with a V17 Super Soft compound of a cord base material which produces an extremely tacky but firm feel, preferred by better golfers.

Heavy Putter Lite Weight Series Black Heel Shaft Mallet Putter $119.99 Heavy Putter Lite Weight Series Black Heel Shaft Mallet Putter The Heavy Putter Lite Weight Series Black Heel Shaft Mallet Putter incorporates the Tour-proven patented weighting technology in a new Lite Weight (600gm) category. This putter is face-balanced and has a double-bend, heel mounted shaft orientation and has a half shaft of offset. It features a cutting-edge design with a sound engineering purpose. The unique head design raises the center of gravity, which together with the elongated alignment line encourages consistent sweet spot contact. The putter is constructed of stainless steel and has a CNC-milled face. Each Lite Weight uses a proprietary shaft with a 65-gram weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the in.wristy in. action in the stroke. Additional Features: Grip: Winn

Yes! Ann Used Putter $44.99 The Yes! Golf C-Groove Ann putter features a uniquely milled striking zone on the face which is designed to get the ball rolling smoother and sooner. The Ann has a 304 stainless steel and blast finish. Many professional golfers have use the C-Groove putters in competition and have had much success.

Yes! Ann Putter $99.99 The Yes! Golf C-Groove Ann putter features a uniquely milled striking zone on the face which is designed to get the ball rolling smoother and sooner. The Ann has a 304 stainless steel and blast finish. Many professional golfers have use the C-Groove putters in competition and have had much success.

Wilson Vizor Putter $149.95 The Wilson Vizor putter incorporates I-Lock technology, which improves putting accuracy by helping the player position the eyes consistently over the line of the putt. It is constructed of an aluminum body and a stainless steel periphery for soft feel and added stability. Its soft urethane face insert provides improved feel.

See More FGP Mallet Putter $149.99 The SeeMore FGP Mallet putter is constructed of cast 303 stainless steel and precision milled faces. The patented RifleScope Technology (RST) alignment system provides a true reference point for optimized alignment on every putt. It is face-balanced, which allows the putter face to be square at impact for improved accuracy.

See More FGP Original Putter $149.99 The SeeMore FGP Original putter is constructed of cast 303 stainless steel and precision milled face. The patented RifleScope Technology (RST) alignment system provides a true reference point for optimized alignment on every putt. It is face-balanced, which allows the putter face to be square at impact for improved accuracy.

Never Compromise Connoisseur Robusto Putter $299.99 The Connoisseur putter is crafted from the finest materials. Each putter is forged from 303 stainless steel and CNV milled to ensure precision during production. The combination of the soft metal and forged structure provides exceptional feel and consistency needed over every putt.

Never Compromise Connoisseur Culebra Putter $299.99 The Connoisseur putter is crafted from the finest materials. Each putter is forged from 303 stainless steel and CNV milled to ensure precision during production. The combination of the soft metal and forged structure provides exceptional feel and consistency needed over every putt.

Never Compromise Connoisseur Perfecto Putter $299.99 The Connoisseur putter is crafted from the finest materials. Each putter is forged from 303 stainless steel and CNV milled to ensure precision during production. The combination of the soft metal and forged structure provides exceptional feel and consistency needed over every putt.

Never Compromise Connoisseur Portofino Putter $299.99 The Connoisseur putter is crafted from the finest materials. Each putter is forged from 303 stainless steel and CNV milled to ensure precision during production. The combination of the soft metal and forged structure provides exceptional feel and consistency needed over every putt.

Heavy Putter CX-2 Mid Weight $119.95 Heavy Putter CX-2 Mid Weight The driving force behind the development of the MID-WEIGHT Series was consumer?s reactions to the original Heavy Putter weight. Some consumers felt it was just too much of a quantum leap from their standard weight putter even though player mechanics are improved with the original weight. Nationwide player testing confirmed that 7 out of 10 golfers prefer the new mid-weight putter over any other putter in golf. Extensive research also indicated that golfers want tra?ditional or classic designs as well as a heavier putter. We chose what we believed to be the best putter designs that have stood the test of time and combined them with our patented Heavy Putter Weighting Technology. The MID-WEIGHT is available in five head styles and is offered in both a black PVD finish and traditional light gray Satin. The construction is cast 304 Stainless Steel with a CNC milled face. A new grip was developed with the help of Winn and we are proud to introduce the only midsize cord grip in the putter industry. Putters are available in standard lengths of 32 in.- 36 in. Features Blade Head Design Plumber?s Neck Hosel Full Shaft Offset 3 deg Loft

Heavy Putter H-1 Mid Weight $119.95 Heavy Putter H-1 Mid Weight The driving force behind the development of the MID-WEIGHT Series was consumer?s reactions to the original Heavy Putter weight. Some consumers felt it was just too much of a quantum leap from their standard weight putter even though player mechanics are improved with the original weight. Nationwide player testing confirmed that 7 out of 10 golfers prefer the new mid-weight putter over any other putter in golf. Extensive research also indicated that golfers want tra?ditional or classic designs as well as a heavier putter. We chose what we believed to be the best putter designs that have stood the test of time and combined them with our patented Heavy Putter Weighting Technology. The MID-WEIGHT is available in five head styles and is offered in both a black PVD finish and traditional light gray Satin. The construction is cast 304 Stainless Steel with a CNC milled face. A new grip was developed with the help of Winn and we are proud to introduce the only midsize cord grip in the putter industry. Putters are available in standard lengths of 32 in.- 36 in. Features Mallet Head Design Center Shaft Zero Shaft Offset 3 deg Loft  70 deg Lie Face Balanced 750 Gram head weight Satin or Black PVD Right Hand Only Mid-Length Available

Heavy Putter H-3 Mid Weight $119.95 Heavy Putter H-3 Mid Weight The driving force behind the development of the MID-WEIGHT Series was consumer?s reactions to the original Heavy Putter weight. Some consumers felt it was just too much of a quantum leap from their standard weight putter even though player mechanics are improved with the original weight. Nationwide player testing confirmed that 7 out of 10 golfers prefer the new mid-weight putter over any other putter in golf. Extensive research also indicated that golfers want tra?ditional or classic designs as well as a heavier putter. We chose what we believed to be the best putter designs that have stood the test of time and combined them with our patented Heavy Putter Weighting Technology. The MID-WEIGHT is available in five head styles and is offered in both a black PVD finish and traditional light gray Satin. The construction is cast 304 Stainless Steel with a CNC milled face. A new grip was developed with the help of Winn and we are proud to introduce the only midsize cord grip in the putter industry. Putters are available in standard lengths of 32 in.- 36 in. Features Mallet Head Design Double Bend Shaft Half Shaft Offset 3 deg Loft  70 deg Lie Face Balanced 750 Gram head weight Satin or Black PVD Right Hand Only Mid-Length Available

Heavy Putter L3 Mid Weight $119.95 Heavy Putter L3 Mid Weight The driving force behind the development of the MID-WEIGHT Series was consumer?s reactions to the original Heavy Putter weight. Some consumers felt it was just too much of a quantum leap from their standard weight putter even though player mechanics are improved with the original weight. Nationwide player testing confirmed that 7 out of 10 golfers prefer the new mid-weight putter over any other putter in golf. Extensive research also indicated that golfers want tra?ditional or classic designs as well as a heavier putter. We chose what we believed to be the best putter designs that have stood the test of time and combined them with our patented Heavy Putter Weighting Technology. The MID-WEIGHT is available in five head styles and is offered in both a black PVD finish and traditional light gray Satin. The construction is cast 304 Stainless Steel with a CNC milled face. A new grip was developed with the help of Winn and we are proud to introduce the only midsize cord grip in the putter industry. Putters are available in standard lengths of 32 in.- 36 in. Features Mallet Head Design Double Bend Shaft Half Shaft Offset 3 deg Loft  70 deg Lie Face Balanced 750 Gram head weight Satin or Black PVD Right Hand Only Mid-Length Available

Apollo 36" Stepped Steel Putter Shaft $2.65 Standard length (36") straight putter shaft. Stepped steel pattern. Our best value! Click here for more information on Apollo Golf Shafts.

Heavy Putter Lightweight Q2 $119.95 Heavy Putter Lightweight Q2 This classic blade design incorporates the tour proven patented weighting technology in a new LITE-WEIGHT 600gm category. The Q2-L is a toe-droop blade with a plumber's neck hosel and has a full shaft of offset. The putter is constructed of Stainless Steel and has a CNC milled face and is offered in a PVD Black or Satin finish. Each LITE-WEIGHT uses a proprietary shaft with a 65 gram weight inserted in the butt end of the shaft; this creates the necessary weight to give the golfer more control of the stroke and also produces a balance point 75% higher than conventional putters that eliminates the wristy action in the stroke. Heavy Putter uses a newly developed Winn Mid-size grip with a V17 Super Soft compound with a cord base material which produces an extremely tacky but firm feel, preferred by better golfers. Features Finish: Black PVD or Satin Stock lengths 32 - 36 Dexterity: Right and Left Hand Total Putter Weight = +- 600 grams Head Weight = +- 375 grams Back Weighting System weight in grip end of shaft = 65 grams Proprietary Steel Shaft Custom Winn Mid-Size Grip Custom Head Cover included Stainless Steel Material CNC Milled Face Loft = 3 deg. Lie Angle = 70 deg.